Replacing Double Glazed Window Handle
If you follow the proper steps following the correct steps, replacing a double-glazed window handle should be relatively simple. First, you must determine what type of handle is on the premises and take a measurement of the spindle.
Cockspur handles can still be found on older uPVC window frames, but have a different height than the aluminum counterparts (also known as spade handles). replacement window handles Repair My Windows And Doors requires them to have a longer spindle.
Measure the Spindle
When replacing a handle on double-glazed window, it is crucial to measure the spindle's length to ensure that you receive the correct replacement. Spindle length is the measurement of how far the handle noses out of the base plate, or how far it extends into the lock. It will vary from handle to handle. When measuring the length of the spindle, it is essential that the old handle has not been removed as you may be unable to get a good reading in this case.
In general, it is expected that a new handle will include a spinning part. You'll find the size of the spinning will vary among handles and manufacturers, so it's important to verify before buying. To save time and energy, it's recommended to buy the spindle and handle together.
Espag handles are the most popular type in uPVC window frames. They use a concealed locking mechanism to shut and open the windows. They are available in a variety of styles and colors to match your home. When selecting an Espag handle for your home, you should be aware of the spindle's dimensions as it can affect the security of your windows.
These handles can be cranked to the left or right depending on your preferences and they are also available in a range of sizes that can be used to fit a wide variety of frames. They are a simple and efficient choice for your double-glazed window.
Another common type of handle is the tilt and turn window handle. These handles are usually large and sturdy, as they lock in two different locations when opening windows. These are available in many finishes, including chrome and stainless steel. They are also made from brass or white uPVC to match the existing ironmongery.
The Cockspur handle is a traditional window handle that has an elongated spur which pushes against the frame's wedge. They are a straightforward and efficient choice for your double-glazed window and they are available in a wide variety of nose and nib heights to accommodate a wide range of profiles.
Take the handle off
There are a variety of different kinds of double glazed window handles that can be fitted to uPVC windows. The most popular type is Espag handles, which are equipped with a spindle that runs through them and connects to the locking mechanism of the window frame. Other handles include tilt-and-turn ones that allow you to tilt the window to let in air or completely open. They are typically heavier and usually have more complicated mechanisms however, they also provide more security. Certain styles of handles can be utilized with a key lock, which provides additional security for your home.
Before you can replace windows handles it is crucial to assess the condition of the handle itself. This will help you determine if a new handle or an existing handle requires a tightening or if it's time to replace it. If the handle is damaged then it needs to be replaced completely.
If the handle is loose, it might be necessary to tighten or tighten. Using a screwdriver, locate the screws inside the handle and remove them. Make sure that you don't use a power tool as it could damage the window frame and the handle. After the screws have been removed, they can be placed in a secure location.
Once the handle is detached from the window frame, you are able to remove the handle from the frame and replace it with a new one. Begin by aligning your new handle with the holes in the window frame. Once you're happy with the alignment, screw into the new handle.
Test your newly installed window handle once you are done by closing and opening the window repeatedly. If you notice any looseness or wobbling, it is essential to tighten the screw, as this could cause the window handle to shift and eventually fall off.
If you are looking for a replacement window handle we have a variety of options in black uPVC, white, chrome, brass and stainless steel. We stock espag inline, cranked, inline and tilt and turn handles for all types of uPVC or timber windows. Based on your preferences, we also have slimline handles that reduce the overall dimensions of your handles, which is ideal if space is a problem.
Take off the Screws
The screws of windows are usually hidden by plastic screw covers, which you will need to remove before installing the new handles. You can remove them with an screwdriver, or perhaps your fingernail. They are usually located above and beneath the handle when it is in its open position. Make sure that you do not damage any of the screws when removing them. If you can, keep the caps in case they're required later in the installation process.
Based on the requirements you have you will find a variety of options for the handle you replace. For instance, if you're seeking something that is more modern than the standard handle, then slimline models can be ideal. These are designed to accommodate the same spindle dimensions as standard handles, but they are smaller and will not interfere with shutters or blinds. There are chrome, stainless steel, and brass options available which can match other ironmongery within your home.
Once you've removed the old handle, it's time to plan your replacement. Before you decide on the replacement, you'll be required to determine the kind of handle that you have and measure the length of its spindle. You will need the new handle to be of the right size for your uPVC window and the screw holes should match the holes on your current one.
When you're ready to install the new handle, you'll need ensure that it's in the open position and that the spindle is properly in its proper position. Then, line up the holes that fix the handle with the existing hole in the window and put the pins or screws in. Be careful not to over-tighten the screws, as this could cause the window frame to crack.
You'll have to test the handle by locking and unlocking the window. It is recommended to do this a few times to make sure that everything works properly, and to check for any issues with the locking mechanism. If you are satisfied with the performance of the new window handle then you can replace screw caps and replace the cover.
Install the New Handle
uPVC window handles are expected to last for a long time. However, they could be damaged and need replacing. Whether the handle is loose due to a loose screw or pin or has broken completely from the base section of the window, it is essential that you determine the cause of the damage before deciding on the best course of action.
In most cases, a handle that is loose on a window has to be tightened in order to fix it. This will require taking off the handle in order to find the screws that secure it. They are usually hidden on the inside face of the handle, however they are easily found with a screwdriver or pair of pliers. Once these are removed, you can then separate the spindle from the handle.
After removing the handle and replacing it with the new one. This is a simple process however it requires care to ensure that the screws are securely in the correct position. The handle should also be positioned correctly and locked in place to ensure that it will not be removed again.
Based on the type of window you have, there are different kinds of handles that you can use. These include Cockspur handles that tilt and turn as well as Espag locks. Each of these have their own specific features It is therefore important to make sure you are using the right type of handle for your window.
It is important that you make use of the same handle you used when replacing a Cadenza handle. This includes the blade's design and the fixing center. If you use an angled blade handle instead of a flat one, an angled blade handle is required to be used, then the blade could break.
Replacing a double-glazed window handle may be a relatively simple process. However, it is important to be aware of the different sizes and styles of uPVC window handles, and so it is essential that you measure the spindle before purchasing the replacement handle. By following the steps described above, you should be able to fit a new handle in no time at all.